These are various pictures of the axle and it's preparation.
As it came on the pallet.
|
It came with shocks, springs and radius arms.
|
As it came on the pallet.
|
Track bar, drag link and tie rod were all attached too.
|
Needed a quick hub nut socket.
|
|
Grimy mess to clean up.
|
Starting to dis-assemble.
|
Getting ready to torch off the stock radius arm mounts.
|
Primer after sandblasting.
|
Adding a coat of paint.
|
Freshly painted.
|
Freshly painted.
|
Lots of parts!
|
Knuckles bolted on.
|
Knuckles bolted on.
|
New axle seal pressed in.
|
"Marlin Tack" on inner axle splines.
|
Assembling the knuckle.
|
Assembling the knuckle.
|
The stock radius arm and a possible modification to it.
|
Scout Saginaw box (stolen from the web somewhere)
|
Assembled knuckle and brakes.
|
Test fitting my spare.
|
Hub just barely fits my 15" wheels.
|
The caliper just barely clears as well.
|
I had to grind a slight ridge off the calipers to fit.
|
|
Tie rod runs under the high pinion.
|
Steering at full lock.
|
|
Big rotors and 4 piston calipers.
|
A little further forward than I want.
|
W-i-d-e
|
|
|
|
|
|
|
|
