These are various pictures of the swap.
Ready to start torching.
|
Driver's side done.
|
Passenger side done.
|
Test fitting the axle.
|
About 4" forward.
|
Height increased about 2.5"
|
|
|
|
Plenty of room for the coils.
|
|
|
|
JY Toy mini-truck solid axle lockouts. 31 spline.
|
The FJ80 drive flange and solid axle mini-truck lockout w/ Isuzu
dial.
|
Fits perfectly!
|
Toy slip/u-joint on left.
Zu slip/u-joint on right.
|
Toy flange on left.
Zu flange on right.
|
Assembled Toy flange to Zu u-joint & slip.
|
Test fitting. Lengthening won't be a big issue.
|
Centers for new radius arms.
|
Driver's side arm with caps tacked in place.
|
Front mounts.
|
|
Working on an adjustable middle mount for caster changes.
|
Passenger side arm.
|
Passenger side arm.
|
Driver's side arm.
|
Driver's side arm. An additional brace will go behind the
frame mount.
|
Front mount on axle. The steering box hasn't been put into
place yet.
|
Another view. (And no, the truck is not sitting on that piece
of tubing).
|
Axle end of the arms.
|
New lower steering shaft.
|
AFCO steering u-joint
|
Hey, I can steer!
|
|
